init

code/vezba10/Makefile

@@ -0,0 +1,70 @@
+# ============================================================================
+# Terminal-only (batch) Vivado/xsim flow for the Calc1 UVM environment.
+#
+#   make            # compile + elaborate + run the default test (test_sanity)
+#   make TEST=test_corner
+#   make run TEST=test_random VERB=UVM_HIGH
+#   make WAVES=1    # also dump calc.vcd
+#   make clean
+#
+# Override the tool location if needed:  make VIVADO=/path/to/Vivado/2022.2
+# ============================================================================
+
+SHELL    := /bin/bash
+VIVADO   ?= /tools/Xilinx/Vivado/2022.2
+SETTINGS := $(VIVADO)/settings64.sh
+
+TEST     ?= test_sanity
+VERB     ?= UVM_LOW
+SEED     ?= random
+SNAP     := calc_sim
+TOP      := calc_verif_top
+
+# run xsim until UVM calls $finish; the driver/monitor have response timeouts
+# so a non-responding DUT is reported, never hung on
+RUN      := -R
+
+# optional waveform dump
+ifeq ($(WAVES),1)
+  WAVEARG := -testplusarg WAVES
+else
+  WAVEARG :=
+endif
+
+DUT_SRCS := $(wildcard dut/*.v)
+INCDIRS  := -i ./verif -i ./verif/Agent -i ./verif/Sequences -i ./verif/Configurations
+TB_SRCS  := ./verif/Configurations/configurations_pkg.sv \
+            ./verif/Agent/calc_agent_pkg.sv \
+            ./verif/Sequences/calc_seq_pkg.sv \
+            ./verif/calc_test_pkg.sv \
+            ./verif/calc_if.sv \
+            ./verif/calc_verif_top.sv
+
+.PHONY: all run comp elab sim clean
+
+all: run
+
+# ---- compile ---------------------------------------------------------------
+comp:
+	@bash -c 'source $(SETTINGS) && \
+	  xvlog --nolog $(DUT_SRCS) && \
+	  xvlog --nolog --sv -L uvm $(INCDIRS) $(TB_SRCS)'
+
+# ---- elaborate -------------------------------------------------------------
+elab: comp
+	@bash -c 'source $(SETTINGS) && \
+	  xelab --nolog -L uvm -timescale 1ns/10ps $(TOP) -s $(SNAP)'
+
+# ---- simulate --------------------------------------------------------------
+sim:
+	@bash -c 'source $(SETTINGS) && \
+	  xsim --nolog $(SNAP) $(RUN) \
+	    -testplusarg UVM_TESTNAME=$(TEST) \
+	    -testplusarg UVM_VERBOSITY=$(VERB) \
+	    $(WAVEARG) -sv_seed $(SEED)'
+
+run: elab sim
+
+clean:
+	@rm -rf xsim.dir xsim.covdb .Xil *.jou *.log *.pb *.wdb *.vcd xelab.* xvlog.* \
+	        webtalk* usage_statistics_webtalk.* 2>/dev/null; echo "cleaned"